Roam Series

Open water, Roam series

Designed by Travis Corken

There are many features that make up the Roam Gun. Firstly it is versatile. The Roam Gun can be easily adapted to chase different species in different conditions and environments. The interchangeable rubbers and shafts gives you greater options when travelling.  So if an opportunity arises to chase a different species, you are ready!

Key features are:

  • A tapered butt, for ease of sighting up targets
  • Interchangable rubbers: 2-5 bands
  • A 3/8 (10mm) enclosed track
  • Interchangeable shafts sizes: 5/16 (8mm) – 3/8 (10mm)
  • A mid-handle mount
  • Pre-drilled stock, for additional wing kits.

 “Over many years of travelling I have learnt so much about spearfishing, with hunting techniques, rigging set-ups and larger blue water guns. This has inspired me to design a gun that can be broken down into components to make travelling easier.  My travel bag usually consists of 2-3 guns depending on location which can be quite difficult with excess baggage fees etc… I wanted a gun that was able to target every fish around the globe.” Says Travis

Read more

Roam Gun

The standard model of the Roam Gun is recommended to take 2 – 3 bands.  It is suited for chasing reef species and pelagics around headlands or outer reef structures. Target species include: jewfish, snapper, spanish mackerel.

The gun is powered by 2 – 3 x 5/8″ (16mm) rubbers and double wraps of 400lb jinki. A simple snap swivel and bungie can be easily set-up for floatlines to be attached. A reel or a break-away are also other options depending on your preferences. The 3/8 enclosed track is ready to accommodate all sized shafts. The standard model is supplied with 72′ 5/16′ (8mm) Hawaiian shafts.

Upgrades are also available with your choice of the 11/32′ (9mm) or 3/8′ (10mm) threaded shafts. A tri-cut or pencil point Mori slip tip are also supplied with your desired choice.

Gun includes (standard)

* 3 rubbers

* Double wraps 400lb jinki

*72′ (186cm) 5/16 (8mm) flopper shaft

 

STANDARD – AUD $1500

*UPGRADE – AUD $1650

Stock and mechanism only – AUD $1200

Stage 1, Roam Gun

Stage 1 of the Roam Gun is for the more experienced spear fisherman or for those chasing larger pelagic species offshore.  A 2-piece wing kit is the first addition to the Roam Gun. It comes complete with a wing kit that provides stability and less recoil when fired, giving you a greater range. Target species include: Wahoo, Dogtooth tuna etc….

The gun is powered by 3 – 4 x 5/8″ (16mm) rubbers and double wraps of 400lb jinki. A simple break-away set-up is ready for your preferred floatlines and floats to be attached. The 3/8 enclosed track is ready to accommodate all sized shafts. Stage 1 of the Roam Gun is supplied with 72′ 5/16′ (8mm) Hawaiian shafts..

Upgrades are also available with your choice of the 11/32′ (9mm) or 3/8′ (10mm) threaded shafts. A tri-cut or pencil point Mori slip tip are also supplied with your desired choice.

Upgrades are recommended to use slip tips in the open blue water when chasing larger pelagic species.

Gun includes, (standard)

*  Stage 1 wing kits.

* 4 rubbers

* Double wrap 400lb jinki

*72′ (186cm) 5/16 (8mm) flopper shaft

STANDARD – AUD $1725

*UPGRADE – AUD $1875 (slip-tip)

Stock and mechanism only – AUD $1400

Stage 2 Roam Gun.

Stage 2 of the Roam Gun is for the experienced spear fisherman who are chasing large pelagic species including: Dogtooth tuna, Yellowfin tuna Marlin etc…. A 4-piece wing kit provides minimal recoil when fired.  Thereby providing maximum range and great accuracy in the open blue water. The stage 2 wing kit allows an estimated 300mm section where the stock is exposed for ease of tracking the fish and manoeuvrability of the gun underwater.

The gun is powered by 4 – 5 x 5/8″ (16mm) rubbers and double wraps of 400lb jinki. A simple break-away set-up is ready for your preferred floatlines and floats to be attached. The 3/8 enclosed track is ready to accommodate all sized shafts. Stage 2 Roam Guns are supplied with your choice of the 11/32′ (9mm) or 3/8′ (10mm) threaded shafts. A tri-cut or pencil point Mori slip tip are also supplied with your desired choice.

Gun includes, (standard)

*  Stage 2 wing kits.

* 65′ (165cm) 11/32 (9mm) or 3/8 (10mm) shaft

* 5 rubbers

* Mori tri-cut or pencil point slip tip.

* Double wrap 400lb jinki

 

STANDARD – AUD $2000

Stock and Mechanism only – AUD $1500

 

Wing kits

Stage 1 and stage 2 wing kits can be brought separately. The wings come pre-drilled to suit the Roam stock and supplied with hex head sex-bolts for installation.

 

Stage 1, wing kit.

AUD $250

 

Stage 2, wing kit.

AUD $350